STL to STEP with real CAD features, not triangles
ScanToStep rebuilds a scanned part the way a design engineer would: a solid with flat faces, holes, bosses, pockets and fillets, checked against the scan at every step.
Why most STL to STEP converters disappoint
An STL file is only a mesh of triangles. Most online converters copy every triangle into the STEP file as its own tiny flat face. The file opens in CAD, but you cannot change a hole size, measure a wall or add a feature. A scan with a million triangles becomes a STEP file with a million faces.
Typical converter
- Every triangle becomes a face
- Huge files, slow to open
- No holes, no dimensions, nothing to edit
ScanToStep
- Real planes, cylinders, cones and fillets
- A feature tree: extrudes, cuts, holes, fillets
- A SOLIDWORKS macro that rebuilds the tree
How it works
- Read the scan. The part is lined up with X, Y and Z, and its units are checked (mm).
- Find the real faces. Planes, cylinders, cones and rounds are fitted to the scan, so every size comes from a measured face.
- Decide the features. Base body, flanges, pockets, bores, bosses, holes, then fillets, in the order a designer would build them.
- Check each feature against the scan. A feature is kept only if it brings the model closer to the scan.
- Deliver. One valid solid as a STEP file, plus a SOLIDWORKS macro that rebuilds the feature tree.
A real result
The replay on the home page is a real build of the NIST FTC 10 test part from its scan: 21 features, one valid solid.
| Scan points within | Share of scan |
|---|---|
| 0.1 mm | 96.4 % |
| 0.2 mm | 98.7 % |
| 0.5 mm | 99.6 % |
| 1.0 mm | 99.9 % |
Questions
Which programs open the STEP file?
Any CAD program that reads STEP: SOLIDWORKS, Fusion, Inventor, CATIA, NX, Creo, FreeCAD and others. The SOLIDWORKS macro is an extra for SOLIDWORKS users who want the full feature tree.
What kind of parts work best?
Mechanical parts made by machining, casting or moulding: housings, brackets, flanges, shafts, covers. Free-form shapes such as sculptures or organic surfaces are not what ScanToStep is built for.
Which files can I upload?
Binary or ASCII STL, up to 100 MB, exported in millimetres. The free preview reads the file in your browser; it is not uploaded.
How much does it cost?
The 3D preview is free. A converted part (STEP file and SOLIDWORKS macro) is $4.99. The online converter is opening soon.